Ventilation duct tools

 ventilation duct tools

 

An increasing number of companies begin to value workmanship quality, fl exibility and task delivery speed. For this reason, apart from the good prices offered by sales platforms like www.alnor-b2b. com.pl, it is important to use actual tools for cutting, joining and installing ventilation ducts. See below for product examples which are perfect for manufacturers of ventilation components as well as contractors and suppliers.

Good tools along with quality products with proper technical card descriptions and certifi cation such as SITAC or Hygiene Attestation ensure that the installed and sold ventilation systems are highly reliable. It’s always worth it to use professional tools.


EQ-PIPE-CUT-800 cutter

Cutter is dedicated for cutting spiral wound ventilation ducts in diameter range between 75 and 800 mm. The main advantages of the tool are:

  •     even cut edge - at 90 degrees angle, with no sheet displacement
  •     does not burn through the zinc coating
  •     eliminates the time-consuming grading of pipe endings – which was especially relevant for class D tight ducts as per Eurovent.

The cutter is perfect for galvanized, aluminum and acid-proof ducts - even with added molybdenum.


Rolles EQ-PIPE-ROLL-3

Rollers are a perfect addition to the EQ-PIPE-CUT-800 cutter.

They eliminate pipe scratches when cutting and rotating the duct. Its flexibility and set points allow to use them with small ventilation ducts 100 - 200 mm, as well as for industrial grade pipes up to 800 mm


NI-AKB-70 manual fastener

Manual fastener is used for easy and efficient joining of type PQ-C frame profiles on square ventilation ducts. 

This allows for a professional installation of the so called “loose frame” on site, on ducts with the following wall thickness: 0,7 for galvanized sheet ducts; 0,5 for acid-proof ducts and 1,0 for aluminum sheet ducts.


Seamer EQ-TRU-F-140

Seamer is used for locking Pittsburgh type seams used to manufacture ventilation ducts.

The machine makes a perfect Pittsburg type seam on straight sections, as well as on internal and external arcs.


EQ-TRU-TF-350 power fastener

Power fastener is used for riveting several layers of material together by means of the so called  „displaced coupling” which is referred to in the standards as DIN 8593 – it is a more expensive but much faster alternative to the manually operated NI-AKB-70 fastener.

This type of joining features 100% shear resistance from the direction lateral to the rivet, in comparison to the traditional rivet coupling.  
The fastener features very low running costs as well as very high fastening speed (two rivets per second)


EQ-TRU-F-300-2 Pittsburgh type seamer 

Seamer is used for manufacturing ventilation and air conditioning ducts. The major features of this seamer model are: 

  •     possibility to make the seam along the small internal and     
  •     external radius,
  •     low running costs,
  •     quick and convenient fastening,
  •     high seam tightness and quality.

Recommended for on-site installation of QDN and QFN square ducts, delivered in “L” shape for easy transportation of large ventilation components.


Power cutters  EQ-TRU-C-160-2P

Power cutters fitted with a chip breaker which allows to remove the cutter from the material at any time.
They are usually used to cut metal sheets, fittings, ventilation ducts, chimney ducts, etc.
Recommended when cutting out holes for inspection hatches in round IPR ducts and square IPFR ducts.


Drill driver  EQ-WWK-1441-2S

Drill driver is used when installing ventilation duct components.

Allows to use lap screws (type: WGO-13-KL – bolt screw; WGO-13-IB – hexagonal; WGO-13-KZ – philips head) to connect the duct with the fitting.

Can be successfully utilized along with a WGO-NK screw cap.


Disc cutter  EQ-SZK-850-125

Disc cutter is recommended for cutting larger items – LDB or LDBST assembly rails for suspending ventilation ducts.


Transformer spot welder  EQ-TECNA-7600

Transformer spot welder is the perfect solution to install GWZ nails for ventilation ducts.

Reliable and tight welds guarantee that the fixed mineral wool insulation layer adheres to the sheet metal surface.


Condenser welder EQ-DEC-SW-15AL

Condenser welder is used for installing reverse-mount nails GWZ-PI – which enable fast fixing of the insulation to the ventilation duct

Good tools along with quality products with proper technical card descriptions and certification such as SITAC or Hygiene Attestation ensure that the installed and sold ventilation systems are highly reliable. It’s always worth it to use professional tools.

 
wentylacja
Ventilation duct tools
Download PDF file »
REKUPERACJA
PROJEKTOWANIE
x
Alnor Systemy Wentylacji
Krakowska 10 Avenue
05-552 Wola Mrokowska
Poland

tel. +48 22 737 40 00