Rectangular constant air volume regulator
Balancing a ventilation system is much easier when each branch delivers the airflow it was designed for, whatever happens to pressure elsewhere in the ductwork. That is the job of RACAV-Q, the new rectangular constant air volume (CAV) regulator in the Alnor range.
RACAV-Q keeps a set airflow steady between 200 and 12 000 m³/h (roughly 55–3 330 l/s) while differential pressure varies from 50 to 1000 Pa. It needs no power supply, wiring or controls. The regulator reacts to pressure changes on its own and holds the flow at the value you set.
Simple to set, easy to fit
You set the required airflow with a dial on the casing, so commissioning takes only a moment. RACAV-Q works in both horizontal and vertical ducts, with the damper blade axis horizontal. For the best accuracy, airflow should reach the regulator evenly across the duct section. Allow a straight duct run upstream, especially after bends, tees and reducers.
Sizes and technical data
Where to use RACAV-Q
RACAV-Q suits supply and extract systems handling clean air in residential, commercial, specialist and industrial ventilation. Typical uses include branch balancing, keeping supply and extract rates matched, and holding design airflow as filters load up or other zones change their demand.
Quick answers
Does RACAV-Q need a power supply? No. It is fully self-acting.
What airflow can it handle? From 200 to 12 000 m³/h, depending on size.
What differential pressure does it work at? From 50 to 1000 Pa.
What sizes does it come in? From 200×100 to 600×600 mm (19 sizes), length 400 mm.
Is there an insulated version? Yes. RACAV-Q-I has the same dimensions.