This website uses cookies. Find out why they are used read our privacy policy. x
By browsing this website you agree to use cookie files, in accordance with the current browser settings.

Rectangular T-pieces and crossing T-pieces

Photo of product family: Rectangular T-pieces and crossing T-pieces


T-pieces and crossing T-pieces are produced in dimensions in accordance with types
referring to rectangular ventilation ducts.

They are available with round and rectangular lateral takeoffs.
In both versions, cross-sections can be reduced and separated.
Separation is made in wye (pant) or twin tees which are terminated with bends.

Rectangular T-pieces and crossing T-pieces - Products range
Miniature picture Product code Name of product Files to download
Photo of product Symmetric t-piece for ventilation TR

Symmetric t-piece for ventilation


The T-pieces are fitted with sheet angles,
and the entire fitting is braced by cross-wise ribbing.

This fitting allows building ductwork with a branch taken off at 90 degrees.
The T-piece height a is fixed.

Symmetric t-piece for ventilation
Photo of product T-piece with rectangular outlet TR1

T-piece with rectangular outlet


The T-piece ends are fitted with sheet angles, and the entire
fitting is braced by cross-wise ribbing.

The T-piece helps building ductwork with a take-off branch at
90 degrees and a reduced size. The inlet and outlet sizes are the same.

T-piece with rectangular outlet
Photo of product T-pieces with round take-off
TR2

T-pieces with round take-off


All T-pieces with round take-offs are fitted with flange frames made of sheet
angles and braced by cross-wise ribbing.

The round take-off port is coaxial in the standard version.
The standard round take-off port is male; the TRL2 version is
available on request with male connector fitted with gaskets.

T-pieces with round take-off
Photo of product Rectangular double branch bends TR3

Rectangular double branch bends


The wye tees are fitted with sheet angles, and the entire fitting is
braced by cross-wise ribbing.

This fitting allows building the ductwork with two take-offs set at any angle.
The width may vary between the two take-off ports.

Rectangular double branch bends
Photo of product T-pieces with take-off bend
TR4

T-pieces with take-off bend


All T-pieces with take-off bends are fitted with flange frames made
of sheet angles and braced by cross-wise ribbing.

A take-off bend provides smooth distribution of air without increasing
the flow turbulence due to the presence of a vane.

T-pieces with take-off bend
Photo of product Eccentric Variable Cross-Section Pant T-piece TR5

Eccentric Variable Cross-Section Pant T-piece


The wye tee (pant) are fitted with sheet angles, and the entire fitting
is braced by cross-wise ribbing.

The wye te divides the air flow between two parallel legs.

Eccentric Variable Cross-Section Pant T-piece
Photo of product Round duct T-connectors
TR6

Round duct T-connectors


The T-connectors allow building a T-connection between a round and a square duct.
One end features a flange frame of sheet angles or a hemmed flange.

The round duct ends are provided with hemming for sheet screws in the standard version.
T-connectors can be fabricated as a fully round T-pieces on request.

Round duct T-connectors
Photo of product Tapered T-piece TR7

Tapered T-piece


The T-piece ends are fitted with sheet angles, and the entire fitting
is braced by cross-wise ribbing.

The T-piece helps building ductwork with a take-off branch at 90 degrees,
reduction of the main duct clear passage and an offset by any value of size m.

Tapered T-piece
Photo of product Concentric Taper T-piece TR8

Concentric Taper T-piece


The T-piece ends are fitted with sheet angles, and the entire fitting is
braced by cross-wise ribbing.

The T-piece helps building ductwork with a take-off branch at 90 degrees,
reduction of the main duct clear passage and an offset by any value of size m.
The take-off can be fabricated with height other than that of the T-piece.

Concentric Taper T-piece
Photo of product Symmetric Taper T-piece TR9

Symmetric Taper T-piece


The concentric reducing T-piece ends are fitted with sheet angles,
and the entire fitting is braced by cross-wise ribbing.

The round take-off connector is male and located symmetrically in the side wall.
This fitting helps building ductwork with a round take-off at an angle; the angle
value depends on the wall slope at the take-off side.

Symmetric Taper T-piece
Photo of product Four-way pieces with round take-offs
CZ2

Four-way pieces with round take-offs


All four-way pieces with round take-offs are fitted with flange frames
made of sheet angles and braced by cross-wise ribbing.

The round take-off ports are coaxial in the standard version.
The standard round take-off ports are male; the CZL2 version is available
on request with male connectors fitted with gaskets.

 

Four-way pieces with round take-offs
Photo of product Four-way pieces with square take-offs
CZ1

Four-way pieces with square take-offs

 

The four-way piece ends are fitted with sheet angles, and the entire fitting is braced by cross-wise ribbing.

This fitting allows building ductwork with branches taken off at 90 degrees.

 

Four-way pieces with square take-offs
REKUPERACJA
PROJEKTOWANIE