Mounting frame for ventilation grilles made of plastics

Plastic ventilation bend with socket formed part round with interior stop for connecting pipes by welding (or PVC bonding up to Ø 250). Manufactured by the process of injection moulding (Ø 50-400), blow moulding (Ø 450-600) or welding per segment (PVC from Ø 700, PP / PPs / PP-EL-s / PE / PVDF from Ø 560). Segment bends are available under the PVC-BSF code.

Plastic branch outlet with socket formed part round with interior stop for connecting pipes by welding (or PVC bonding up to Ø 250). Manufactured by the process of injection moulding (Ø 50-315) or prefabricated (from Ø 355, PVDF from Ø 450).

Y-piece made of plastics allows even air distribution in ventilation systems. Y-piece has
45 ° branch-offs with female connectors. Manufactured by the process of injection
moulding and pre-fabricated.

Available materials in stock: PVC polyvinyl chloride, PP polypropylene,
PPs flame-resistant polypropylene, PE polyethylene

Available materials upon special order: white PVC polyvinyl chloride,
PP-EL-s flame resistant electrically, PVDF Polyvinylidene fluoride

Plastic saddle with a 90° branch-off . It is a component for
making a branch for a round pipe. The connection to the
installation is made by welding. The fitting has a socket ending.

Plastic end cap for round ducts with socket. Manufactured by the process of injection moulding (up to Ø 400) or prefabricated (from Ø 450).

PB-PP Perforated plastic-coated (polypropylene) suspension tape for round
ducts. This is an ideal solution whenever a fine adjustment of suspension
height and level is required, or when regular suspension rings are not feasible.

Product advantages:

• is the ideal solution when you need to install round plastic
  ventilation ducts, i.e. wherever there is an aggressive
  environment, e.g. acids, alkalis - this material will not
  corrode
• during the installation of plastic ducts for heat recovery
  units, you will not run the risk of cutting the outer surface
  of the material.
• If you are installing ventilation ducts outdoors, the PB-PP
  tape is ideal due to the weather-resistant plastic coating.

Plastic regulating damper, with a blade, designed for round ducts, with sockets, connected by welding (or PVC bonding up to Ø 250). Manufactured by the process of injection moulding (up to Ø 400) or prefabricated (from Ø 450).

Plastic regulating air damper for round ducts, prepared for the installation of an actuator,
with female connections, joining by welding (or PVC gluing to Ø250). Manufactured by
the process of injection moulding (up to Ø400) or prefabricated (from Ø450).

Available materials in stock: PVC polyvinyl chloride, PP polypropylene,
PPs flame-resistant polypropylene, PE polyethylene

Available materials upon special order: white PVC polyvinyl chloride,
PP-EL-s flame resistant electrically, PVDF Polyvinylidene fluoride

Circular plastic sound attenuator, female connections. Attenuating material
made of mineral wool, 10mm thick, inner perforated pipe covered
with fiberglass. Acoustic parameters tested by IFI Institute for Industrial
Aerodynamics GmbH in accordance with the DIN EN ISO 7234 standard.
Lengths available between 500-2000mm.

Available materials in stock: PVC polyvinyl chloride, PP polypropylene,
PPs flame-resistant polypropylene, PE polyethylene

Available materials upon special order: white PVC polyvinyl chloride,
PP-EL-s flame resistant electrically, PVDF Polyvinylidene fluoride

Plastic supply and extract ventilation grille with an adjustable row of
front blades (version A) or front and back blades (version C) or
with fixed blades at an angle of 45 ° (version S). The advantage
of PVC-SHR-S grille is that it can be custom made in any size.
For installation on round ducts, it's recommended to use
PVC-SHR-RMO mounting frame.

Available materials in stock: PVC polyvinyl chloride, PP polypropylene,
PPs flame-resistant polypropylene, PE polyethylene

Available materials upon special order: white PVC polyvinyl chloride,
PP-EL-s flame resistant electrically, PVDF Polyvinylidene fluoride

The TAGF plastic roof base is used for correct installation of
supply and extract vents in ventilation systems. The roof base
is available in various angular versions (roof pitch angle): 0˚,
1-22˚, 23-45˚.

Available materials in stock: PVC polyvinyl chloride, PP polypropylene,
PPs flame-resistant polypropylene, PE polyethylene

Available materials upon special order: white PVC polyvinyl chloride,
PP-EL-s flame resistant electrically, PVDF Polyvinylidene fluoride