This website uses cookies. Find out why they are used read our privacy policy. x
By browsing this website you agree to use cookie files, in accordance with the current browser settings.

End caps

Photo of product family: End caps


End caps are manufactured in diameters from range 80 to 1600 mm of galvanized, aluminum, and stainless steel sheet.

It's recommended to choose the version with EPDM seals to ensure "D" airtightness class according to EN 12237 (SITAC certificate).

Depending on the type of connection there are the following types of end caps:

  • CS/CSL segmented end caps are made with negative tolerance and are inserted inside a round duct. They are also produced with a handle enabling the frequent opening of an access door as CSH/CSLH end caps.
  • CPF duct end cap has a diameter equal to a diameter of a duct and is used for stopping all types of fittings. As a CPFH version, it is made with a handle enabling opening.
  • CP duct end cap is a universal solution enabling to end a ventilation fitting. CP ducting end cap is available only in dimensions range 80 to 315 mm.
End caps - Products range
Miniature picture Product code Name of product Files to download
Photo of product Pressed plug end with gasket CPSL

Pressed plug end with gasket

The CPSL plug ends are pressed with a male end on the duct
side to blind it at air tightness class D. The plug end
rim is long enough to easily secure it with WGO screws
without any risk of cutting the gasket's double lip.

CPSL plug ends are equipped with a stop fold
which prevents inserting the fitting too deep
into the duct.

Safe edges (rolled edges) allow the duct
installer safer installation of the ductwork, by
minimizing the possibility of cuts.

Pressed plug end with gasket
Photo of product End caps for round spiral ducts with gaskets CSL

End caps for round spiral ducts with gaskets

The CSL end cap is made of segments. The male end on the
duct side blinds it at air tightness class D. The end cap
rim is long enough to easily secure it with WGO screws
without any risk of cutting the gasket's double lip.

End caps for round spiral ducts with gaskets
Photo of product Pressed plug end without a agasket CPS

Pressed plug end without a agasket

 

The plug end is pressed. The plug end has a male end inserted
into the duct to blind and seal its end. The class of air tightness
can be improved by wrapping the end cap joint and the screws
or rivets used to fasten it to the duct with the TAL, TALE, or
DUCT sealing tape.
CPS plug ends are provided with a stop fold which prevents
inserting the piece too deep into the duct.

Pressed plug end without a agasket
Photo of product Segmented plug end without a gasket CS

Segmented plug end without a gasket

The plug end is made of segments. The end cap has a male
end inserted into the duct to blind and seal its end. The class
of air tightness can be improved by wrapping the plug end
joint and the screws or rivets used to fasten it to the duct
with the TAL, TALE, or DUCT sealing tape.

Segmented plug end without a gasket
Photo of product Pressed end caps for fittings CP

Pressed end caps for fittings

The CP closure is a pressed unit available without a gasket
only. A part of the closure can be expanded for blinding
round fittings.

Pressed end caps for fittings
Photo of product End caps for ventilation duct fittings CPF

End caps for ventilation duct fittings

The cap end is pressed. The cap end is a female piece mounted
at the end of a fitting with or without a gasket to blind it. The
class of air tightness of a gasket-free joint can be improved by
wrapping the end cap joint and the screws or rivets used to
fasten it to the duct with the TAL, TALE, or DUCT sealing tape.

End caps for ventilation duct fittings
Photo of product Long pressed universal closure CPNF

Long pressed universal closure


The end cap is pressed without gaskets. One end is male for
insertion into a spiral coiled duct. The other end is a long
female sleeve for mounting on fittings with or without gaskets.

Long pressed universal closure
Photo of product Segmented end cap without a gasket CSF

Segmented end cap without a gasket

 

The end cap is made of segments. The end cap is a female
piece mounted at the end of a fitting with or without a gasket
to blind it. The class of air tightness of a gasket-free joint can
be improved by wrapping the end cap joint and the screws
or rivets used to fasten it to the duct with the TAL, TALE, or
DUCT sealing tape.

Segmented end cap without a gasket
REKUPERACJA
PROJEKTOWANIE
`