The new models are the HRU-SlimAIR-350 and HRU-SlimAIR-500, with capacities of 350 and 500 m3/h, respectively. Ceiling-mounted heat recovery units can be equipped with an enthalpy exchanger (moisture recovery) and a CF module (constant air flow). The maximum heat recovery for the HRU-SlimAIR-350 is up to 94%. The version with enthalpy exchanger (the HRU-SlimAIR-350E) is characterized by heat recovery up to 91% and moisture recovery up to 87%.
The heat recovery efficiency of HRU-SlimAIR-500 heat recovery units is up to 95.2%, and for the version with enthalpy exchanger (the HRU-SlimAIR-500E), up to 89% heat recovery and up to 85% moisture recovery.
Universal installation is a unique feature of SlimAIR heat recovery units: they can be wall-mounted horizontally, vertically, or suspended horizontally (HRU-SlimAIR-250 and HRU-SlimAIR-350). In the case of HRU-SlimAIR-500, this unit is designed to be either ceiling- or wall-mounted, vertically.
HRUs are equipped with pleated filters with increased filtration area, which generate low pressure drops. The filters are classified as ISO Coarse 70% according to ISO 16890. ISO ePM1 55% fine filters are also available.
Why is it worth choosing a SlimAIR recuperator?
Mounting in 3 positions (HRU-SlimAIR-250 and HRU-SlimAIR-350)
Slim and compact design
2 condensate drains
Access to filter replacement from two sides
CF constant flow system
Built-in pre-heater (only for HRU-SlimAIR-250-H unit)
Using a special mounting rack, installation can be done by one person
High thermal and acoustic insulation of the casing
These and other products for ventilation and heat recovery can be found in the PRODUCTS section