Round duct and fittings

Note!

Note!

Note!

Reproduction, copying, photographing, scanning, digitizing document for marketing purposes is prohibited. The model document is published exclusively for customers who have purchased the products listed in the document.

Type III Environmental Product Declaration No. 637/2024

Type III Environmental Product Declaration No. 637/2024

Type III Environmental Product Declaration No. 637/2024

Certification body: Instytut Techniki Budowlanej (ITB)

Application: This declaration is the Type III Environmental Product Declaration (EPD) based on EN 15804+A2 and verified according to ISO 14025 by an external auditor. It contains the information on the impacts of the declared construction materials on the environment and their aspects verified by the independent body according
to ISO 14025. Basically, comparison or evaluation of EPD data is possible only if all the compared data were created according to EN 15804+A2.

Products: Steel ventilation ducts and fittings

Technical Approval -

Technical Approval - "D" class leaktightness according to EN 12237:2003 - round elements with seals

Technical Approval - "D" class leaktightness according to EN 12237:2003 - round elements with seals


Certification body: RISE Research Institutes of Sweden AB | Certification (formerly SITAC )

Application: Designed for use in ventilation systems in apartment buildings, industrial plants and public utility objects including hospitals.

Products: Alnor round Spiral duct system

Alnor round spiral ducts and ductwork elements are manufactured according to Swedish Technical Approval no. 0103/07 issued by RISE (formerly SP Certifiering).

 

TÜV Rheinland Monitoring + Testing  -  Round ventilation duct and fittings

TÜV Rheinland Monitoring + Testing - Round ventilation duct and fittings

TÜV Rheinland Monitoring + Testing - Round ventilation duct and fittings


Certification body: TÜV Rheinland Group

Application: Designed for use in ventilation systems in apartment buildings, industrial plants and public utility objects including hospitals.

Products: Round ventilation ducts and fittings, access doors, round roof elements

National declaration of performance no. 001/01/2022

National declaration of performance no. 001/01/2022

National declaration of performance no. 001/01/2022


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type:  Ventilation pipes SPIRAL®system with a circular cross-section made of galvanized steel: SPR-Z.

Intended use(s): Intended to be used for distribution air in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

National technical assessment: ITB-KOT-2019/1036 issue 2, 2021

National technical assessment body:  Instytut Techniki Budowlanej 

National declaration of performance no. 002/01/2022

National declaration of performance no. 002/01/2022

National declaration of performance no. 002/01/2022


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type:  Ventilation pipes SPIRAL®system with a circular cross-section made of galvanized steel: SPR-C.

Intended use(s): Intended to be used for distribution air in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

National technical assessment: ITB-KOT-2019/1036 issue 2, 2021

National technical assessment body:  Instytut Techniki Budowlanej 

National declaration of performance no. 003/02/24

National declaration of performance no. 003/02/24

National declaration of performance no. 003/02/24


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type: Ventilation fittings SPIRAL®system with a circular cross-section made of galvanized steel- gasketless system: ASV, BP (BPKC, BPBKC), BPD, BPK, BPKF, BS, BSD, BSK, CP, CPF (CPFH), CPNF, CPS, CS (CSN, CSH), CSF, ILP, ILPR, ILS, ILSF, ILSN, ILSV-45, KIL, MSF, NS, ODSO, RPC, RPCF, RSCL, RSCLF, RSF, RSFC , RSFCF, RSFF, RSL, RSLF, SP, SPS, SS, SSC, SSCCB, SSCFB, SSCV-45, TPC (TPC-CP ), TS, TSC, TSV(-45, TVR ), XPC, XS, XSC, XSV-45, YSV-45.

Intended use(s): Intended to be used for air distribution in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

National technical assessment: ITB-KOT-2019/1036 issue 2, 2021

National technical assessment body:  Instytut Techniki Budowlanej 

National declaration of performance no. 004/03/24

National declaration of performance no. 004/03/24

National declaration of performance no. 004/03/24


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type: Ventilation fittings SPIRAL®system with a circular cross secion made of galvanized steel - gasket system: ASVL, BPDL, BPKFL, BPKL, BPL (BPKCL, BPBKCL), BSDL, BSKL, BSL, CPSL (CPSHL), CSL (CSHL), GALA, ILPL, ILPRL, ILSL, ILSNL, ILSVL-45, KILL, NSL, ODSOL (ODSOQL), RPCFL, RPCL, RSCLFL, RSCLL, RSFCFL, RSFCL, RSFFL, RSFL, RSLFL, RSLL, SMSFL, SNSL, SPL, SPSL, SSCCBL, SSCFBL, SSCL, SSCVL-45, SSL, TPCL (TPCL-CP), TSCL, TSL , TSVL-45, XPCL, XSCL, XSL, XSVL(-45, COLL), YSVL-45.

Intended use(s): Intended to be used for air distribution in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

National technical assessment: ITB-KOT-2019/1036 issue 2, 2021

National technical assessment body:  Instytut Techniki Budowlanej 

National declaration of performance no. 005/01/22

National declaration of performance no. 005/01/22

National declaration of performance no. 005/01/22


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type: Ventilation pipes SPIRAL®system with a circular cross-section made of stainless steel 1.4301/304 or 1.4404/316L: SPR-K.

Intended use(s): Intended to be used for air distribution in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

National technical assessment: ITB-KOT-2019/1036 issue 2, 2021

National technical assessment body:  Instytut Techniki Budowlanej 

National declaration of performance no. 006/01/22

National declaration of performance no. 006/01/22

National declaration of performance no. 006/01/22


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type: Ventilation fittings SPIRAL®system with a circular cross- section made of stainless steel 1.4301/304 and 1.4404/316L, gasketless system: NS-K, MSF-K, KIL-K, ILSV-45-K, ILS-K, ILSF-K, ILPR-K, ILP-K, BSK-K, BSD-K, BS-K, BPK-K, BPKF-K, BP-K, BPD-K, YSV-45-K, TSV-45-K, XSV-45-K, TSC-K, TS-K, XSC-K, XS-K, TPC-K, XPC-K, TPC-CP-R-K, SSCV-45-K, SS-K, SSC-K, SSCFB-K, SSCCB-K, SPS-K, SP-K, RSCF-K, RSFCF-K, RSF-K, RSFF-K, RSCL-K, RSL-K, RSCLF-K, RSLF-K, RPC-K, RPCF-K, ODSO-K, CS-K, CSF-K, CPS-K, CP-K, CPNF-K, CPF-K, ILSN-K, ASV-K.

Intended use(s): Intended to be used for air distribution in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

National technical assessment: ITB-KOT-2019/1036 issue 2, 2021

National technical assessment body:  Instytut Techniki Budowlanej 

National declaration of performance no. 007/01/22

National declaration of performance no. 007/01/22

National declaration of performance no. 007/01/22


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type: Ventilation fittings SPIRAL®system with circular cross-section made of stainless resistant steel  1.4301/304 or 1.4404/316L, gasket system: NSL-K, KILL-K, ILSVL-45-K, ILSL-K, ILPRL-K, ILPL-K, BSKL-K, BSDL-K, BSL-K, BPL-K, BPKL-K, BPKFL-K, BPDL-K, YSVL-45-K, TSVL-45-K, XSVL-45-K, TSCL-K, TSL-K, XSCL-K, XSL-K, TPCL-K, XPCL-K, TPCL-CP-R-K, SSCVL-45-K, SSL-K, SSCL-K, SSCFBL-K, SSCCBL-K, SPSL-K, SPL-K, SNSL-K, SMSFL-K, RSCFL-K, RSFCFL-K, RSFL-K, RSFFL-K, RSCLL-K, RSLL-K, RSCLFL-K, RSLFL-K, RPCL-K, RPCFL-K, ODSOL-K, CSL-K, CPSL-K, ILSNL-K, ASVL-K.

Intended use(s): Intended to be used for air distribution in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

National technical assessment: ITB-KOT-2019/1036 issue 2, 2021

National technical assessment body:  Instytut Techniki Budowlanej 

National declaration of performance no. 018/02/22

National declaration of performance no. 018/02/22

National declaration of performance no. 018/02/22


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type: Ventilation ducts: SPR-A.
Ventilation fittings with gasket: ASVL-A, BPL-A, BSDL-A, BSKL-A, BSL-A, CSL-A, GALA-A, ILSL-A, ILSNL-A, ILSVL-45-A, KILL-A, NSL-A, ODSOL-A, RPCL-A, RSCLFL-A, RSCLL-A, RSLFL-A, RSLL-A, RSFCL-A, RSFCFL-A, RSFL-A, RSFFL-A, SMSFL-A, SNSL-A, SPSL-A, SSL-A, SSCCBL-A, SSCFBL-A, SSCL-A, SSCVL-A, TPCL-A, XPCL-A, TSCL-A, TSL-A, XSL-A, TSVL-A, XSVL-A, XSCL-A, YSVL-A.
Ventilation fittings without gasket: ASV-A, BS-A, BSD-A, BSK-A, CS-A, CSF-A, ILS-A, ILSF-A, ILSN-A, ILSV-45-A, KIL-A, MSF-A, NS-A, ODSO-A, RPC-A, RSCL-A, RSCF-A, RSCLF-A, RSL-A, RSLF-A, RSFC-A, RSFCF-A, RSF-A, RSFF-A, SPS-A, SS-A, SSC-A, SSCCB-A, SSCFB-A, SSCV-A, TPC-A, TPC-CP-R-A, XPC-A, TSC-A, TS-A, XS-A, TSV-A, XSV-A, XSC-A, YSV-A.

Intended use(s): Intended to be used for air distribution in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

Polish product standard: PN-EN 1506:2007, PN-EN 12237:2005

National declaration of performance no. 040/01/23

National declaration of performance no. 040/01/23

National declaration of performance no. 040/01/23


Manufacturer: ALNOR Systemy Wentylacji Sp. z o.o.

Designation of construction product type:

Ventilation pipes SPIRAL®system with a circular cross-section made of galvanized steel: SRGL (seam welded), SRGW (butt welded).
Ventilation pipes SPIRAL®system with a circular cross-section made of stainless steel: SRGL-K (seam welded), SRGW-K (butt welded).
Ventilation pipes SPIRAL®system with a circular cross-section made of aluminium: SRGL-A (seam welded), SRGW-A (butt welded).

Intended use(s): Intended to be used for air distribution in ventilation and air conditioning installation inside buildings, including residential, collective residence and public utility buildings.

Polish product standard: PN-EN 1506:2007, PN-EN 12237:2005

M1 Cleanliness classification air handling components Segmented Fittings

M1 Cleanliness classification air handling components Segmented Fittings

M1 Cleanliness classification air handling components Segmented Fittings


Certification body: The Building Information Foundation RTS sr

Reference document: the Classification of Indoor Climate 2008 and the Cleanliness Classification of Air-handling Products, General Instructions

Products: segmented fittings: bends, flat reductions, reducers, collar saddles, saddles tees, t-pieces, y-pieces, male couplings, coupling with gasket, lateral pressed saddles, setoffs, regulating dampers, adjusting and shut-off dampers, back draught dampers, sliding dampers, multi-blade dampers

M1 Cleanliness classification air handling components Pressed Fittings

M1 Cleanliness classification air handling components Pressed Fittings

M1 Cleanliness classification air handling components Pressed Fittings


Certification body: The Building Information Foundation RTS sr

Reference document: the Classification of Indoor Climate 2008 and the Cleanliness Classification of Air-handling Products, General Instructions

Products: pressed bends, reducers, t-pieces, take-offs

M1 Cleanliness classification air handling components Spiral Ducts

M1 Cleanliness classification air handling components Spiral Ducts

M1 Cleanliness classification air handling components Spiral Ducts


Certification body: The Building Information Foundation RTS sr

Reference document: the Classification of Indoor Climate 2008 and the Cleanliness Classification of Air-handling Products, General Instructions

Products: spiral ducts

Hygienic certificate - Spiral ducts and fittings - galvanized

Hygienic certificate - Spiral ducts and fittings - galvanized

Hygienic certificate - Spiral ducts and fittings - galvanized


Hygienic Certificate No: B.BK.60112.0225.2022, B.BK.60112.0226.2022 valid till 2027.08.22

Certification body: National Institute of Public Health - National Institute of Hygiene

Application: ventilation and air-conditioning systems in residential housing, public utility building, hospitals and industrial facilities.

Products: Spiral and rectangular ducts as well as duct fittings made of galvanized steel

Hygienic certificate - Spiral ducts and fittings - stainless steel

Hygienic certificate - Spiral ducts and fittings - stainless steel

Hygienic certificate - Spiral ducts and fittings - stainless steel


Hygienic Certificate No: B.BK.60112.0230.2022, B.BK.60112.0231.2022 valid till 2027.08.22

Certification body: National Institute of Public Health - National Institute of Hygiene

Application: ventilation and air-conditioning systems in residential housing, public utility building, hospitals and industrial facilities.

Products:  Spiral and rectangular ducts and fittings made of stainless steel

Hygienic certificate - Spiral ducts and fittings - aluminium

Hygienic certificate - Spiral ducts and fittings - aluminium

Hygienic certificate - Spiral ducts and fittings - aluminium


Hygienic Certificate No: HK/K/0437/07/2017 valid till 2022-07-04; HK/K/0437/08/2017 valid till 2022-07-04

Certification body: National Institute of Public Health - National Institute of Hygiene

Application: ventilation and air-conditioning systems in residential housing, public utility building, hospitals and industrial facilities.

Products: Spiral and rectangular ducts and fittings made of aluminium as well as intake and exhaust louvres, grilles, air dampers, roof cowls.

Report - Testing of air tightness of a circular duct system

Report - Testing of air tightness of a circular duct system

Report - Testing of air tightness of a circular duct system


Certification body: Accredited Testing Laboratory - SP Technical Research Institute of Sweden

Test object: Circular duct system - sheet thickness 0.5 mm, 0.6 mm, 0.7 mm, 1.2 mm.

Reference document: standard EN 12237:2003 ”Ventilation for buildings – Ductwork – Strength and leakage of circular sheet metal ducts”.

REKUPERACJA
PROJEKTOWANIE
x
Alnor Ventilation Systems
Krakowska 10 Avenue
05-552 Wola Mrokowska
Poland

tel. +48 22 737 40 00