HRU-MinistAIR residential heat recovery units are a newversion of a well recognized model, based on a completely new design. Airflows of 325 m3/h and self-supporting casing made of EPP, acting as thermal and acoustic insulation at the same time. Counter-flow heat exchangers, made of PET, are responsible for heat recovery and enthalpic exchangers (E) recover moisture. In addition, the built-in RH sensor will take care of moisture level in the building. Left and Right version, together with horizontal installation, will allow you to adapt the unit to almost each project. Moreover, 56 cm width will allow installation in narrow spaces or wardrobes.
Wireless communication is used, likewise other series, both for controllers and IAQ sensors. Control is possible also via a mobile application.
Key performance features:
Heat recovery: up to 95.5%
Mounting in 3 configurations- wall-mounted: vertically, horizontally and standing on the floor
Left-hand and right-hand units (mirror image of the connections)
A horizontal model for both left and right configuration
Two condensate drains. By designing the inclinations in EPP, excess water can flow freely to the drain connector
Replacement of filters is easy without opening the cover
Compact dimensions. The unit's width is only 560mm. Units can be installed in standard 600mm cupboards thanks to these dimensions
Modulated by-pass
Free-cooling functions - also referred as Passive Cooling (no energy is needed) or Night Cooling (mostly happens during night), can be used to cool a building with outdoor air, when the room temperature is higher than the outside temperature
Free-heating functions - also referred as Passive Heating (no energy is needed), can be used to heat a building with outdoor air, when the room temperature is lower than the outside temperature
Performance tested according to EN 13141-7 standard
Wall mounting racks and feet included
Replaceable duct connections
Wireless control through mobile application or web browser
Remote control possible by any CO2 or RH wireless sensor
![Photo of product
Heat recovery ventilation unit with counterflow exchanger [left/right]](/assets/components/phpthumbof/cache/HRU-MinistAIR-250-LS-compact-housing.9dcbd1cde5c207599f649fa727bc80e720008.png)
![Photo of product
Heat recovery ventilation unit with enthalpic counterflow exchanger [left/right]](/assets/components/phpthumbof/cache/HRU-MinistAIR-H-250-LS-compact-housing.9dcbd1cde5c207599f649fa727bc80e720008.png)