References | Alnor

2019-03-29A multi-family house - in-wall recovery heat

Facility: A multi-family house - in-wall recovery heat

Supplied elements: HRU-WALL is a single-tube recuperator equipped with a ceramic exchanger that has a recovery of up to 82%. The energy-saving EC fan alternates every 70 seconds by blowing and extracting air from the room. The intra-wall recovery heat is intended for installation in a single room and can be used both in newly constructed buildings as well as in existing buildings, where it is not possible to install traditional recuperation for architectonic reasons.

Completion date: 2018r.

See the photo gallery for the facility.

2018-12-20Office building - ducts and fittings insulated with rubber foam

Facility: Office building - ducts and fittings insulated with rubber foam

Supplied elements: Round ducts and segmented ventilation fittings in the version provided with the factory-mounted EPDM rubber gasket, owing to which the whole system ensures the insulation class - “D” - the insulation class is confirmed with the ingress protection certificate - SITAC.

Completion date: 2018r.

See the photo gallery for the facility.

2018-12-03Turbo-compressor factory - single-blade dampers

Facility: Turbo-compressor factory - single-blade dampers

Supplied elements: The single-blade rectangular dampers are used to adjust or close the air flow in ventilation ducts. The dampers may be controlled by means of the manual mechanism - the outer actuator - or they are adapted to the installation of the actuator.

Completion date: 2018r.

See the photo gallery for the facility.

2018-11-30Facility: Car engine factory - ducts and fittings insulated with rubber foam, large diameters

Facility: Car engine factory - ducts and fittings insulated with rubber foam, large diameters

Supplied elements: Round ducts and segmented ventilation fittings in the version provided with the factory-mounted EPDM rubber gasket, owing to which the whole system ensures the insulation class - “D” - the insulation class is confirmed with the ingress protection certificate - SITAC.

Completion date: 2018r.

See the photo gallery for the facility.

2018-10-30Water and Sewage Management Plant - ducts and fittings made of acid-resistant metal sheet

Facility: Water and Sewage Management Plant - ducts and fittings made of acid-resistant metal sheet

Supplied elements: Ducts and fittings made of acid-resistant metal sheet, grade 1.4301, applicable in ventilation systems in an aggressive environment. The ducts and fittings are made of factory-mounted EPDM rubber gaskets which ensure insulation class "D" according to Eurovent.

Completion date: 2018r.

See the photo gallery for the facility.

2018-10-15Office building - Pressed bends - short - execution of the female-male

Facility: Office building - Pressed bends - short - execution of the female-male

Supplied elements: Short pressed ventilation bend used for SPIRAL ducts and ventilation plain ducts. Linear seal ensures class D tightness without additional sealants. Two-lip rubber gasket from EPDM rubber ensures ventilation and recuperation installation class D according to the standard. Thanks to the small radius, the ceiling space is saved. The BPKFL ventilation knee version on one side has a sleeve dimension to directly connect to a ventilation valve mounting frame such as KN-RM or KWO-RML.

Completion date: 2018r.

See the photo gallery for the facility.

2018-09-28Sports shop - GCR ceiling-mounted swirl diffusers

Facility: Sports shop - GCR ceiling-mounted swirl diffusers

Supplied elements: GCR swirl diffuser with fixed blades bent at a constant angle. It is made of powder-painted galvanized steel sheet in the RAL9010 colour. Swirl diffusers ensure the mixing of the supplied air with air in the room, therefore, they are recommended for cold air supply. They ensure the stable air flow and are designed for rooms up to the height of 4m, e.g. in public utility facilities such as hotels, restaurants and shops.

Completion date: 2018r.

See the photo gallery for the facility.

2018-09-14Villa estate - acoustic silencers

Facility: Villa estate - acoustic silencers

Supplied elements: Round silencers are used to suppress noise in ventilation systems based on a round duct system. They are made of spiral wound tube with a circular cross-section - which acts as an outer cladding, as well as a layer of mineral wool, an insulated fabric insulated from inside, and a perforated steel wire. Silencers limit the noise in ventilation pipes, created by such devices as fans, control panels as well as noises emanating from individual rooms. Thanks to the aesthetic design and consistency with other parts of the ventilation system, silencers can also be mounted in visible places.

Completion date: 2018r.

See the photo gallery for the facility.

2018-08-27Office building - access doors

Facility: Office building - access doors

Supplied elements: IPFQ access doors intended for mounting on rectangular ventilation ducts, facilitating the hygienic condition of the installation, through periodic cleaning and disinfection. There is a template attached to each flap to facilitate cutting the hole in the existing ventilation system, and their construction and gasket guarantee perfect adhesion of its surface to the surface of the duct on which it is installed, thanks to which the installation is tight.

Completion date: 2018r.

See the photo gallery for the facility.

2018-08-27Public building - in-wall recovery heat

Facility: Public building - in-wall recovery heat

Supplied elements: HRU-WALL is a single-tube recuperator equipped with a ceramic exchanger that has a recovery of up to 82%. The energy-saving EC fan alternates every 70 seconds by blowing and extracting air from the room. The intra-wall recovery heat is intended for installation in a single room and can be used both in newly constructed buildings as well as in existing buildings, where it is not possible to install traditional recuperation for architectonic reasons.

Completion date: 2018r.

See the photo gallery for the facility.