Facility: Water and Sewage Management Plant - ducts and fittings made of acid-resistant metal sheet
Supplied elements: Ducts and fittings made of acid-resistant metal sheet, grade 1.4301, applicable in ventilation systems in an aggressive environment. The ducts and fittings are made of factory-mounted EPDM rubber gaskets which ensure insulation class "D" according to Eurovent.
Completion date: 2018r.
Facility: Office building - Pressed bends - short - execution of the female-male
Supplied elements: Short pressed ventilation bend used for SPIRAL ducts and ventilation plain ducts. Linear seal ensures class D tightness without additional sealants. Two-lip rubber gasket from EPDM rubber ensures ventilation and recuperation installation class D according to the standard. Thanks to the small radius, the ceiling space is saved. The BPKFL ventilation knee version on one side has a sleeve dimension to directly connect to a ventilation valve mounting frame such as KN-RM or KWO-RML.
Completion date: 2018r.
Facility: Sports shop - GCR ceiling-mounted swirl diffusers
Supplied elements: GCR swirl diffuser with fixed blades bent at a constant angle. It is made of powder-painted galvanized steel sheet in the RAL9010 colour. Swirl diffusers ensure the mixing of the supplied air with air in the room, therefore, they are recommended for cold air supply. They ensure the stable air flow and are designed for rooms up to the height of 4m, e.g. in public utility facilities such as hotels, restaurants and shops.
Completion date: 2018r.
Facility: Villa estate - acoustic silencers
Supplied elements: Round silencers are used to suppress noise in ventilation systems based on a round duct system. They are made of spiral wound tube with a circular cross-section - which acts as an outer cladding, as well as a layer of mineral wool, an insulated fabric insulated from inside, and a perforated steel wire. Silencers limit the noise in ventilation pipes, created by such devices as fans, control panels as well as noises emanating from individual rooms. Thanks to the aesthetic design and consistency with other parts of the ventilation system, silencers can also be mounted in visible places.
Completion date: 2018r.
Facility: Office building - access doors
Supplied elements: IPFQ access doors intended for mounting on rectangular ventilation ducts, facilitating the hygienic condition of the installation, through periodic cleaning and disinfection. There is a template attached to each flap to facilitate cutting the hole in the existing ventilation system, and their construction and gasket guarantee perfect adhesion of its surface to the surface of the duct on which it is installed, thanks to which the installation is tight.
Completion date: 2018r.